The picture is an example of 3DSXL kits. This is an example of the 3DSXL kit. Please note that if you use a mobile email address as a contact address when you purchase this item, any message that we might send may not be able to reach your mobile address.
This is a 3DSXL video capture. This item includes the following items.
- 3DSXL(USA version)
- Mini USB Connector
- Cameron USB FX SPA3
- JUNFLON Wiring
- Lead-free Solder Alloy
- Assembling Manual
- Installation Manual
You need to have a Mini USB Cable to connect to your PC (sold separately).
When you purchase a kit, we will assemble it in our soldering factory for free. (This would normally cost 122.5US$).
If you wish to use our assembling service, please write “Plus Kits assembling service” when purchasing.
This equipment is assembled referring to the idea of cameleon team.
An example of assembly:
A Cameron USB FX SPA3 and a mini USB cable are built into the external case. The 3DSXL picture is displayed via USB. This equipment is assembled using the process in the article on our blog.
We will send a URL where you can download the viewer and necessary software after you purchase the item.
Please note that we do not warrant against any damage or defects due to incompatibility with your PC.
We will send the URL about the required software and viewer, after you purchase the item.
Please note that we do not warrant any damage or defects due to the incompatible of your PC. Although the case is brand new, there may be some minor wear.
We also sell separately the mini USB Cable 1.8m (5.9 ft) at 6US$, and the special AC adapter at 7.25US$.
Please refer to the following blog to see the assembly process and the captured picture.
You can also drop by Saizeriya at Akihabara, where we can show you some actual assembled kits. So please visit us and ping us via Twitter.